Alternatives to Water Makers Australia.
An Australian-owned modular range using standard FilmTec membranes and locally supported components. Its published component ratings let us show transparent nameplate-based estimates while measured total running draw remains outstanding. If you are looking past it, the brand that overlaps most of its output range on the least energy is Schenker, from 3.7 Wh per litre.
If you were looking at…
Each Water Makers Australia system paired with the closest system another brand makes, by output — the thing that actually makes two units substitutable. Energy and price differences run in whichever direction the figures put them.
| Water Makers Australia | Closest alternative | Energy | Price |
|---|---|---|---|
| Performance Single 80L · 12V feed 80 nominal L/hr · 20.1 Wh/L | Rainman Frame AC 100L, auto 70–110 L/hr · 13.9 Wh/L | −6.2 Wh/L | +$5,730 |
| Performance Double 140L · 12V feed 140 nominal L/hr · 11.5 Wh/L | Schenker Zen 150 150 L/hr | — | — |
| Performance Triple 200L · 12V feed 200 nominal L/hr · 8.1 Wh/L | Rainman Frame AC 240L Torrent, auto 180–264 L/hr · 12.6 Wh/L | +4.6 Wh/L | +$5,908 |
| Automatic Triple 200L · AC feed 200 nominal L/hr · 11.4 Wh/L | Rainman Frame AC 240L Torrent, auto 180–264 L/hr · 12.6 Wh/L | +1.2 Wh/L | −$4,161 |
Energy column: negative means the alternative uses less per litre. Price column: positive means it costs more.
The other brands, in one line each
Rainman
23 systems, 31.5–222 L/hr, 9.8–19.7 Wh/L. Conventional high-pressure pump.
Schenker
4 systems, 30–150 L/hr, 3.7–4.8 Wh/L. ERS energy recovery.
Spectra
4 systems, 24–64 L/hr, 4.5–4.5 Wh/L. Clark pump energy recovery.
Dessalator
3 systems, 60–100 L/hr, 7.0–9.2 Wh/L. Conventional high-pressure pump. Figures are manufacturer-reported and not yet confirmed by us.
LEDI
1 system, 20–20 L/hr, 10.0–10.0 Wh/L. Conventional high-pressure pump. Figures are manufacturer-reported and not yet confirmed by us.
Common questions
- What is a good alternative to Water Makers Australia?
- On the published figures, Schenker: it covers a similar output range and reaches 3.7 watt-hours per litre at its best, against 8.1 for Water Makers Australia. Which is right still depends on your power source and whether the system can be installed on your boat — the table above pairs each Water Makers Australia model with its closest match by output.
- Is Water Makers Australia worth the money?
- On energy, 2 of its 4 systems use less per litre than the nearest system another brand makes at similar output. On price, 2 of 4 undercut that same alternative. Those are different questions and a range can win one while losing the other. We do not rate build quality, reliability or support, because we have not tested these machines; what we can compare is what the manufacturers publish, and that is what the table above does.
- Who sells Water Makers Australia in Australia?
- 1 verified business, including Water Makers Australia. Availability matters as much as specification — a system nobody services near you is a worse buy than one that is a little thirstier.
Alternatives to the other brands
How “closest” is decided. Nearest by rated litres per hour from a different brand, with efficiency breaking ties. That is a deliberately mechanical rule: it stops the page becoming a list of whatever we would rather sell you, and it matches how people actually shop — first for enough water, then for what it costs to make. Prices are indicative and exclude freight and installation. Methodology.