Conventional · 6–12 Wh/LNameplate estimate

Water Makers Australia Performance Triple 200L · 12V feed

Modular · AC 240V · 3 × SW30-2540
200 nominallitres per hour
1,610watts drawn
8.1Wh per litre
$9,181indicative price

Nameplate-based estimate, not measured total draw. The total above adds the manufacturer's published high-pressure motor rating and feed-pump rating. It makes the system comparable without pretending that component nameplates are a power-meter result. It is shown so the system can be compared at all, and excluded from our best-and-worst-in-table claims until confirmed. Nameplate estimate: 1.5 kW high-pressure motor rating plus 110 W feed pump. This is not measured total running draw; the motor rating may describe shaft output rather than electrical input. How we source figures.

What you are actually buying

Drawn to this model’s own published specification: modular, 3 × SW30-2540 membranes, and a pump driven by an AC 240V motor.

Schematic of the Water Makers Australia Performance Triple 200L · 12V feedA flow schematic of the Water Makers Australia Performance Triple 200L · 12V feed, a modular watermaker. Seawater passes through a prefilter to a high pressure pump driven by an AC 240V motor, then through a membrane count the manufacturer does not publish. Fresh water leaves at the manufacturer's rated 200 nominal litres an hour; the concentrate goes overboard.seawaterprefilterHP pumpAC 240V1610 Wmembrane count not publishedfresh water200 nominal L/hrbrinesold as a modular unit
Schematic drawn from the published specification, not from the manufacturer’s own drawing. The Water Makers Australia Performance Triple 200L · 12V feed is a modular system with a membrane count the manufacturer does not publish, driven by an AC 240V motor. Rated 200 nominal L/hr for 1610 W, which is 8.1 Wh per litre.

What it costs to run

A four-person crew using 25 litres a head needs 100 litres a day. On this system that is:

0.5 hrun time per day
805 Whenergy per day
0.5×400 W panel-days
$46per L/hr of capacity

This is an AC system, so it needs a generator, shore power or a large inverter. The Wh figure is what the generator has to cover.

Is it worth it?

At 8.1 watt-hours per litre it sits mid-table: 2.2 times the energy of the most efficient system we rank, and about 2.4 times less than the thirstiest. 805 Wh puts 100 litres in the tank.

Suits

  • Filling tanks in a short window. At 200 nominal litres an hour, 100 litres takes 0.5 hours — the length of an engine run you were making anyway.
  • Awkward spaces. The modules mount separately, so they fit around obstructions a single frame will not clear.

Look elsewhere if

  • Boats without a generator or a large inverter. 1,610 W on 240 V is not something a modest inverter starts happily.
  • Anyone shopping on price alone. At $9,181 it is in the dearest quarter of the table, and cheaper systems make the same litres.
  • Boats you cannot drill. This is an installed system: intake, seacock, brine discharge and a wiring run, quoted separately from the unit.

Worth pricing against it: Schenker Zen 100 makes 100 litres an hour at 4.0 Wh/L, so the same 100 litres costs 405 Wh less every day — for $419 more up front. See the Zen 100 →

Every line above is a consequence of a published figure. We have not tested this machine and publish no opinion on its build, reliability or support. How we judge systems.

Where it sits in the market

Ranked 8 of 34 rated systems on watt-hours per litre, where lower is better.

0best 3.720 Wh/L

A conventional high-pressure pump, but with enough membrane area behind it to keep the energy per litre reasonable. How the two technologies differ →

What people cross-shop it against

The rest of the Water Makers Australia range

Common questions

How much power does the Water Makers Australia Performance Triple 200L · 12V feed use?
It draws 1,610 W and makes 200 nominal L/hr, which works out to 8.1 watt-hours per litre. Making 100 litres — four people at 25 litres a head — costs about 805 Wh.
How long does the Performance Triple 200L · 12V feed take to make a day's water?
At its rated 200 nominal L/hr, 100 litres takes about 0.5 hours. Output falls in cold or silty water, so treat that as a best case rather than a promise for every anchorage.
How much does the Water Makers Australia Performance Triple 200L · 12V feed cost in Australia?
Our indicative figure is $9,181, taken from European and US dealer listings and excluding freight, duty and installation. Australian dealer pricing is usually all-inclusive and reads higher. Ask a stockist for a landed AUD quote before you budget.
Who sells the Water Makers Australia Performance Triple 200L · 12V feed in Australia?
1 verified Australian business is listed as Water Makers Australia dealers or specialists, including Water Makers Australia. Each entry links to the manufacturer or company page that proves it.
Is the Performance Triple 200L · 12V feed efficient?
It ranks 8 of 34 rated systems in our table on watt-hours per litre, where lower is better. The best in the table is 3.7 Wh/L. It uses a conventional high-pressure pump, which is the main reason it sits above the energy-recovery systems.
Is the Water Makers Australia Performance Triple 200L · 12V feed worth it?
At 8.1 watt-hours per litre it sits mid-table: 2.2 times the energy of the most efficient system we rank, and about 2.4 times less than the thirstiest. 805 Wh puts 100 litres in the tank. It suits several cases: Filling tanks in a short window. At 200 nominal litres an hour, 100 litres takes 0.5 hours — the length of an engine run you were making anyway. Look elsewhere if: Boats without a generator or a large inverter. 1,610 W on 240 V is not something a modest inverter starts happily. We publish no opinion on build quality or reliability, because we have not tested it.